Buy Solid Shaft Incremental Rotary Encoders Online

£96.82

Click HERE for hollow shaft incremental rotary encoders

Buy Incremental Rotary Encoders Quickly & Easily Online. Free UK Delivery On Orders Over £50! In Stock Now, Next Day Delivery Available. POSITAL IXARC incremental encoders provide high resolution measurement using an incremental interface. Configure with any PPR up to 16384 using common configurations such as A, B, Z, inverted signals and are available as either HTL (Push-Pull) or TTL (RS422). Encoders come with a 10M cable that can be cut to length for any application. Configure your encoder below :

Clear
SKU: UCD-IPH00-XXXXX-XXXX-ARW Category:

Description

Interface
Interface Programmable Incremental
Programming Functions PPR (1-16384), Output, Counting Direction
Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)
Outputs
Output Driver Push-Pull (HTL)
Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage
> V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL) < 0.5 V
Output Voltage High Level RS422 (TTL) > 4 V
Output Voltage Low Level RS422 (TTL) < 0.5 V
Maximum Frequency Response 1 MHz
Maximum Switching Current 50 mA per Channel
Electrical Data
Supply Voltage 4.75 – 30 VDC
Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption ≤ 1.0 W
Start-Up Time < 1 s
Min. Load Resistance 120 Ω
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 280 years @ 40 °C
Sensor
Technology Magnetic
Accuracy (INL) ±0.0878° (≤ 12 bit)
Duty Cycle 180° ± 27° (Speed > 100RPM)
Phase Angle 90° ± 14° (Speed > 100RPM)
Environmental Specifications
Protection Class (Shaft) IP65
Protection Class (Housing) IP66/IP67
Operating Temperature -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) – +70 °C (+158 °F)
Humidity 98% RH, no condensation
Mechanical Data
Mechanical Data
Housing Material Steel
Housing Coating Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type Synchro, ø 58 mm (Y)
Flange Material Aluminum
Shaft Type Solid, Length = 10 mm
Shaft Diameter ø 6 mm (0.24″)
Shaft Material Stainless Steel V2A (1.4305, 303)
Max. Shaft Load Axial 40 N, Radial 110 N
Rotor Inertia ≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed ≤ 12000 1/min
Shock Resistance ≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length 56,7 mm (2.23″)
Weight 1270 g (2.80 lb)
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
550 (20 N / 40 N), 195 (40 N / 60 N), 135 (40 N / 80 N), 85 (40 N / 110 N)
Electrical Connection
Connection Orientation Radial
Cable Length 10 m [394″]
Wire Cross Section 0.14 mm² / AWG 26
Material / Type PVC
Cable Diameter 6 mm (0.24 in)
Minimum Bend Radius 46 mm (1.81″) fixed, 61 mm (2.4″) flexing
Certification
Approval CE + cULus listed, Industrial Control Equipment
Product Life Cycle
Product Life Cycle Established
Connection Plan
SIGNAL CABLE COLOR
A Green
/A Yellow
B Gray
/B Pink
Z Blue
/Z Red
Power Supply Brown
GND White
Shielding Shield
Connector-View on Encoder

 

Pulse Diagram

 

Rotation Clockwise (seen on shaft)
Dimensional Drawing

 

drawing-mcd-y060-q5b-n.png
drawing-mc-5-cr-432-sws-nnn12b-n-arw-n.png

 

Download the 2D Drawing

Additional information

Shaft Diameter

6mm, 10mm

Flange

Clamp (58mm), Syncro (58mm)

Pulse Per Revolution (PPR)

250, 500, 1024, 2500, Other

Output

HTL, TTL