POSITAL’s programmable draw wire encoders simplify your linear position measurement. Not only can the user define their own draw wire output (i.e. 0-10V at 0 to 5m or 0 to 4.252m) to match their application, they can also reconfigure certain programmable parameters.

Machines and needs may evolve over time, that’s why POSITAL has extended the functionality of the UBIFAST configuration tool . In just a few clicks the user will be able to program the desired measurement range and length per revolution. To create simple installation with precise measurement, POSITAL have joined the power of their UBIFAST configuration tool with the accuracy of LINARIX to offer reliable products with excellent repeatability (±0.002 % Full Scale Operation).

Thanks to LINARIX, linear position measurement has been made even easier! In the past, linear measurements were made with pinon and racks that required precise mechanical alignment. This was inconvenient as the pinon could jump and miss a tooth subsequently delivering the wrong position information.

Easily Define the Output of your Linear Sensor

With POSITAL’s LINARIX draw wires, simply press the set one button, pull the cable up to the distance you want to measure, press the set two button, and let the cable retract. This allows for anyone to simply define their own draw wire output (i.e. 0-10V at 0 to 5m or 0 to 4.252m) to match your application.

  • Easily Scale Your Measurement Range for Analog Versions
  • Programmable Versions Done Simply via UBIFAST
  • Large Variety of Interfaces : Analog, SSI, CANopen
  • Draw Wire Adapters Available from 1 to 15 M

See our range of POSITAL products here. Find out more about POSITAL’s programmable draw wire encoders by giving us a call on 01344 266530. Furthermore, you can email your enquiry to [email protected]

Emolice is the UK and Ireland’s Gold Partner distributor for POSITAL FRABAPOSITAL FRABA is a German manufacturer that designs and markets sensors for motion control and safety assurance systems.